Back to Blog
Flirc usb uk5/11/2023 The Xsights have the MCE RC6 code set built-in, so you merely need to program the correct code number (1272 from memory) - it should not be necessary to learn any buttons. It may require a bit of learning initially, but that is worth doing, and the enthusiasts on the RMIR web site are usually very helpful. it does not require an internet connection). The tool is "RMIR", which can be found here. There is an excellent freeware tool that can program One-for-All remote controls, including the Xsight range. The Xsights were originally intended to be programmed using the One-for-All web site (the Xsights have a USB socket), but One-for-All closed that web site several years ago. Although I dearly love the Harmony "activities", as the months pass I am becoming increasingly annoyed by the Harmony's quirks, so I may return to using one of the Xsights. In newer versions, I just use " Enable HID" and everything works.Ĭlick to expand.I have several Xsight remotes (a "Lite", a "Plus", and a "Colour"), but I currently use a Harmony 650. Since MediaPortal can use WMC RC6 commands directly, I never had to "muck about with selecting and configuring remote controls in the MP Configuration." In older MP versions there was a dedicated MCE Remote option. The FLIRC GUI Advanced settings mentions a FLIRC WMC profile as well as the MS one, but I couldn't find any way to invoke it. In particular, the colored buttons (red, yellow, green and blue) have been combined with the media selection buttons: these are separate on my RC6 remote. The FLIRC Microsoft WMC profile has 8 buttons fewer than the remote I got with my FSC Scaleo E. I would have preferred that, because I know from my experience with programming my Xsight Touch that programmed codes are more reliable than learned ones. Since the Microsoft WMC RC6 remote control has standardized key codes, I would have expected these to be already included in the profile. I realized that that was the only way and did the same using the FLIRC profile for Microsoft WMC. Remote commands are received by whichever application is in focus.Thanks for responding. Play/Pause is Ctrl-P, you can also change volume (Ctrl-+ or Ctrl- Ctrl-M for Mute) or jump tracks using Ctrl-L for Previous and Ctrl-N for Next. A pretty graphic of a full keyboard appears - you select the key that you want, then press the corresponding button on the remote that you want to use. In the Flirc application, select 'full keyboard' from the 'Controllers' menu item. The most important button is 'Play', which you will probably want to set-up to send a Ctrl-P key press. The application detects and tells you if the dongle is present or not. You'll obviously need to consider line-of-sight between your listening position and the USB port - a USB hub on your desktop would be one way. The dongle comes with a 'Flirc' application - in Ubuntu, you install this with the usual 'sudo apt-get install flirc' command, or from the Ubuntu software centre. As usual, the UK price is higher, but Maplin's offer them at £24.95. Go to and buy one of the USB infra-red receivers - they are $18.95 in the US. The makers say it works with Macintoshes too, but Apple probably preferred that you used something they made themselves from a solid billet of fake unobtainium TM and charged too much for. I've also been able to test Flirc on Windows. This little gadget allows you to use an existing remote to pause playback remotely when using MediaCenter on a Linux box - and you can set-up other functions too, if you want. Bob asked me to provide details of using a Flirc USB infra-red receiver to control MediaCenter under Linux.
0 Comments
Read More
Leave a Reply. |